Product

Electrical Panels

The PCCs / MCCs / PDBs shall be totally enclosed, completely dust proof and degree of protection being not less than IP 43 for Indoor panels & IP-54 for outdoor panels. The Panel shall be equipped complete with all type of required number of air circuit breakers, switch fuse unit, contactor, relays, fuses, meters, instruments, indicating lamps, push buttons, equipment, fittings, bus bar, cable boxes, cable glands etc. and all the necessary internal connections /wiring as required. Designed and type tested as per IEC 60298 & 60694 / IS:3427 standards.

Products

Low Voltage Panel

Intelligent motor control centres (IMCC) offer the end user greater visibility and control of the system. Status and alarm monitoring can be viewed locally at the IMCC with a HMI or remotely in a control area. Intelligent Motor Control Centre (IMCC) combines rugged durability and premium quality, and integrate control and power into one centralized package. Our industry meets highest standards and offer solutions for networking and communications, and safety. Cost benefits of selecting a smart networked motor control solution compared to a traditional hardwired solution.

  • IEC 61508 / IEC 61511 Safety standard
  • Ethernet, Profibus, Profisafe, Control-net, Device-net industrial networking.
  • IEC 61131-3 Programming
  • IEC 61439-1: 2011, Low-voltage switchgear and control gear assemblies – Part 1: General rules
  • IEC 61439-2: 2011, Low-voltage switchgear and control gear assemblies – Part 2: Power Switchgear and control gear assemblies
  • IEC 60204-1:1997, Safety of machinery - Electrical equipment of machines – Part 1: General requirements
  • Construction: Form 4B, draw out /withdrawable unit.
  • Busbar System Current Rating : up to 6300A
  • Busbar System Short Circuit Rating : 50 KA /80KA/ 100KA per 1S
  • Low Voltage Rating : 415V / 690V
  • Cable Access : Top, Bottom, Front or Rear
  • Ingress Protection : IP 54, IP 42 or IP31
  • Panel Colour : Available in all RAL or BS colours
  • Components : ABB, Siemens, Schneider, Rockwell / Allen-Bradley /L&T

MEDIUM AND HIGH VOLTAGE PANEL

11KV, 22KV & 33KV Panels with Vacuum Circuit Breakers and SF-6 CBs. Available with current ratings up to 4000A and Short Time Ratings of 26.3/40KA. Panel is designed and type tested to meet the requirements of IEC-60298 / IS: 3427. These switchboards are designed for use in HV/MV and MV/LV substations and in industrial systems. They can be provided with Sulphur Hexafluoride (SF6) circuit breakers, Air-vacuum circuit breakers, and/or vacuum contactors, relays, metering and communication device so they can be installed and used in areas characterized by extreme conditions.

  • Vacuum Circuit Breaker Panel
  • Gas Insulated Switchgear Panel
  • Substation Panel
  • Ring Main Units (RMU)
  • Relay / Control / Drive Panels
  • APFC Panel
  • Synchronization Panel
  • PLC and Scada system Panel

Explosion/Flame Proof Electrical Panels

Explosion proof electrical products like Switchgears, push button, panel, light fitting, junction Boxes for Petrochemical, Refinery, Oil and Gas, Oil well, Pesticides, Chemicals, Fertilizers, Pharmaceuticals where explosion hazards are likely to be encountered due to presence of flammable gases, vapors, chemicals.

  • ATEX approval
  • IEC Ex approval
  • Standard: IEC 60079
  • Material Of Construction : Aluminum LM6, Stainless Steel
  • Area Classification : Zone 1 or Zone 2
  • Location: hazardous locations
  • Gas Group :Group I, IIA, IIB, IIC
  • Degree of protection : IP 65/ IP 66